Pnp/Pci Configurations - Gigabyte 7CN700ID User Manual

2-6

PnP/PCI Configurations

PNP OS Installed
Reset Configuration Data
Resources Controlled By
x IRQ Resources
PCI/VGA Palette Snoop
Assign IRQ For USB
: Move
Enter: Select
F5: Previous Values
PNP OS Installed
No
Yes
Reset Configuration Data
Enabled
Disabled
Resources Controlled By
Auto(ESCD)
Manual
PCI/VGA Palette Snoop
Enabled
Disabled
Assign IRQ For USB
Enabled
Disabled
Phoenix- AwardBIOS CMOS Setup Utility
PnP / PCI Configurations
[No]
[Disabled]
[Auto(ESCD)]
Press Enter
[Disabled]
[Enabled]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Disabled this function. (Default value)
Enabled this function.
Clear PnP information in ESCD & update DMI data. (Default value)
Disabled this function.
BIOS automatically use these PnP rescuers. (Default value)
User can set the PnP resource (I/O Address, IRQ & DMAchannels) used by
legacy ISA DEVICE.
For having Video Card on ISA Bus and VGA Card on PCI Bus.
For VGA Card only.(Default value)
Assign IRQ for USB. (Default value)
No assign IRQ for USB.
- 37 -
Item Help
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help
BIOS Setup