Gigabyte GA-7ZMMH User Manual

Amd athlon/duron socket a processor motherboard

Advertisement

DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declares that the product
Product Name:
Mother Board
GA-7ZMMH
Model Number:
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)
This device may not cause harmful
and
(2)
this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name:
ERIC LU
Eric Lu
Signature:
Date:
Mar. 12, 2001
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection
against
residential
installations.
generates,
uses,
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
harmful
interference
This
equipment
and
can
radiate
in
radio

Advertisement

Table of Contents
loading

Summary of Contents for Gigabyte GA-7ZMMH

  • Page 1 LA Puent, CA 91744 Phone/Fax No: (818) 854-9338/ (818) 854-9339 hereby declares that the product Product Name: Mother Board GA-7ZMMH Model Number: Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), Class B Digital Device Supplementary Information: This device complies with part 15 of the FCC Rules.
  • Page 2: Declaration Of Conformity

    Safety of household and similar electrical appliances (Stamp) Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T. Technology Träding GMbH declare that the product Mother Board GA-7ZMMH is in conformity with EN 61000-3-2* EN60555-2 EN61000-3-3* EN60555-3 EN 50081-1 EN 50082-1 EN 55081-2...
  • Page 3 7ZMMH AMD Athlon /Duron Socket A Processor Motherboard USER'S MANUAL AMD Athlon /Duron Socket A Processor Motherboard REV. 2.0 First Edition R-20-01-010402...
  • Page 5 How This Manual Is Organized This manual is divided into the following sections: 1) Revision List 2) Item Checklist 3) Features 4) Installation Guide 5) Performance & Block Diagram 6) Suspend to RAM 7) Four Speaker & SPDIF 8) @BIOS ™...
  • Page 7: Table Of Contents

    Revision History Item Checklist Summary of Features 7ZMMH Motherboard Layout Installation Guide Page Index for Connectors / Panel and Jumper Definition Performance List Block Diagram Suspend to RAM Installation Four Speaker & SPDIF Introduction @BIOS Introduction Page Index for BIOS Setup Technical Support / RMA Sheet Appendix Table Of Content...
  • Page 9: Revision History

    7ZMMH Motherboard Revision History Revision Revision Note Initial release of the 7ZMMH motherboard user’s manual. The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners.
  • Page 10: Item Checklist

    Item Checklist The 7ZMMH motherboard Cable for IDE / floppy device CD (GA-7ZMM CD) for motherboard driver & utility 7ZMMH user’s manual Item Checklist...
  • Page 11 7ZMMH Motherboard Features Summary Form factor 24.4 cm x 23.1 cm Micro ATX size form factor, 4 layers PCB. AMD Athlon 256K/64K L2 cache on die Supports 600MHz ~ 1GHz and above Chipset Pro Savage KM133A, consisting of: VT8365A Memory/AGP/PCI Controller(PAC) VT82C686B PCI Super-I/O Integrated Peripheral Controller (PSIPC) Clock Generator...
  • Page 12 On-Board Sound PS/2 Connector BIOS On-Board VGA Additional Features Creative CT5880 sound AC’97 CODEC Line In / Line Out / Mic In / AUX In / CD In / TEL / SPDIF / Game Port / Four Speaker PS/2 Keyboard interface and PS/2 Mouse interface Licensed AMI BIOS, 2M bit flash ROM Build S3 Savage4 (86C370) in VT8365A Support shared memory architecture...
  • Page 13: 7Zmmh Motherboard Layout

    7ZMMH Motherboard 7ZMMH Motherboard Layout PS/2 Socket A CPU Creative CT5880 AGP 1 PCI1 PCI2 JP11 PCI3 VT8365A 7ZMMH VT82C 686B USB2 LED1 BAT1 BIOS...
  • Page 14: Installation Guide

    Installation Guide Getting Started WARNING! Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. Unplug your computer when working on the inside.
  • Page 15 7ZMMH Motherboard To set up your computer, you must complete the following steps: Step 1 - Set system jumpers Step 2- Install the Central Processing Unit (CPU) Step 3-Install memory modules Step 4-Install expansion cards Step 5-Connect ribbon cables, cabinet wires, and power supply Step 6-Set up BIOS software Step 7-Install supporting software tools Step 5...
  • Page 16 CPU Speed Setup The system bus frequency can be switched at 95MHz-145MHz by adjusting SW 1. (The frequency ratio depend on CPU). SW1 Select the System Speed at 95MHz - 145MHz. JP10: CPU Clock Frequency Please make sure that JP10 setting is in accordance with your CPU clock frequency. Wrong setting may cause system unable to boot.
  • Page 17: Cpu Installation

    7ZMMH Motherboard CPU Installation Please make sure the CPU should be supported to the motherboard. CPU Top View Socket Actuation Lever 1.Pull the lever out and lift it up. CPU Heat Sink Installation: Beware: Please check that the heat sink is in good contact with the CPU before you turn on your system.
  • Page 18 Installation Guide 3.Align CPU and insert it 4.Use compliant fan approved by AMD. (Please refer to your heatsink installation manual for application of thermal grease to provide better heat conduction between your CPU and heatsink.) 5.Hook one end of the cooler bracket to the CPU socket. 6.
  • Page 19: Memory Installation

    7ZMMH Motherboard Memory Installation The motherboard has 2 dual inline memory module (DIMM) sockets support 4 banks. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM Slot .The DIMM module can only fit in one direction due to the two notch. Memory size can vary between sockets.
  • Page 20: Page Index For Connectors / Panel And Jumper Definition

    Page Index for Connectors/Panel and Jumper Definition Connectors ATX Power COM A / VGA / LPT Port Floppy Connector Game & Audio Port IDE 1(Primary) / IDE 2(Secondary) Connector J2 (System Fan) J3 (CPU Fan) J7 (AUX_IN) J8 (TEL) J9 (CD Audio Line In) J12 (Wake On LAN) J13 (Ring Power On) JP2 (Front Audio)
  • Page 21: Connectors

    7ZMMH Motherboard Connectors ATX Power Please note: AC power cord should only be inserted to your power supply unit after ATX power cable and other related devices are firmly connected to the mainboard. COM A / VGA / LPT Port Please note: This mainboard supports 1 standard COM port, 1 VGA port and 1 LPT port.
  • Page 22 PS/2 Keyboard & PS/2 Mouse Connector Please note: This mainboard supports standard PS/2 keyboard and PS/2 mouse interface connector. USB1: USB Connector Please note: Before you connect your device(s) into USB connector(s), please make sure your device(s) such as USB keyboard, mouse, scanner, zip, speaker..etc. have a standard USB interface.
  • Page 23: Floppy Port

    7ZMMH Motherboard USB2: Front USB Connector Please note: Be careful with the polarity of the front panel USB connector. Check the pin assignment while you connect the front panel USB cable. Please contact your nearest dealer for optional front panel USB cable. Floppy Port Pin No.
  • Page 24: Game & Audio Port

    Game & Audio Port Please note: Line Out 1: Line Out or SPDIF (The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby digital decoder). To enable SPDIF, simply insert SPDIF connector into Line Out1. Line Out1 will become SPDIF Out automatically.
  • Page 25: J7: Aux In

    7ZMMH Motherboard J9: CD Audio Line In J7: AUX IN Pin No. Definition CD-L CD-R Pin No. Definition AUX-L AUX-R...
  • Page 26 J8: TEL (The connector is for internal modem card with voice connector) J13: Ring Power On Pin No. Definition Signal-In Signal-Out Pin No. Definition Signal Connectors...
  • Page 27 7ZMMH Motherboard J2: System FAN JP6: Power FAN Pin No. Definition Control +12V SENSE Pin No. Definition Control +12V SENSE...
  • Page 28: J12: Wake On Lan

    J3: CPU FAN Please note: A proper installation of the CPU cooler is essential to prevent the CPU from running under abnormal condition or damaged by overheating. J12: Wake on LAN Pin No. Definition Control +12V SENSE Pin No. Definition +5V SB Signal Connectors...
  • Page 29: Jp2: Front Audio

    7ZMMH Motherboard JP8 / LED1: STR LED Connector & DIMM LED Please note: Do not remove memory modules while DIMM LED is on. It might cause short or other unexpected damages due to the 3.3V stand by voltage. Remove memory modules only when STR function is disabled by jumper and AC Power cord is disconnected.
  • Page 30: Panel And Jumper Definition

    Panel And Jumper Definition J11: For 2X11 Pins Jumper GN (Green Switch) GD (Green LED) HD (IDE Hard Disk Active LED) SPK (Speaker Connector) RE (Reset Switch) P+P P (Power LED) PW (Soft Power Connector) Please note: Please connect the power LED, PC speaker, reset switch and power switch etc of your chassis front panel to the front panel jumper according to the pin assignment above.
  • Page 31: Jp3: Clear Cmos Function

    7ZMMH Motherboard JP3: Clear CMOS Function Please note: You may clear the CMOS data to its default values by this jumper. JP4: USB Device Wake up Selection Please note: (If you want to use “USB Dev Wakeup from S3~S5” function, you have to set the BIOS setting “USB Dev Wakeup from S3~S5”...
  • Page 32: Amr Audio Modem Riser

    J16 /J17/J18: AMR (Primary or Secondary) Select [Optional] (AMR Please note: This MB supports AMR slot, you can look up the table above to choose the appropriate AMR card for your board. JP1: Front MIC Audio Modem Riser) Onboard AC97 AMR (Primary) (Default) Onboard AC97 MR...
  • Page 33: Jp7: Str Selection

    7ZMMH Motherboard JP7: STR Selection JP9: BIOS Write Protection Please note: To flash/upgrade BIOS on this MB JP9 must be set to 2-3 close. We recommend JP9 to be set to “1-2 close”, whenever user does not need to flash/upgrade the BIOS.
  • Page 34: Jp11: Onboard Sound Function Selection

    JP11: Onboard Sound Function Selection BAT1: Battery Panel and Jumper Definition Enable Disable (Default) Pin No. Definition 1-2 close Onboard Sound Enable (Default) 2-3 close Onboard Sound Disable CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
  • Page 35: Performance List

    AMD K7 Athlon (128x1) MB SDRAM (Kingmax KSV884T4A1A-07) DRAM 384 KB included in Althon CACHE SIZE 192 KB included in Duron Gigabyte GF2000 DISPLAY Onboard IDE (Quantum AS30000AT 30GB) STORAGE Windows 2000 + SP1 + DirectX8 O.S. Display Driver at 1024 x 768 x 64k colors x 75Hz.
  • Page 36 AMD K7 Athlon (128x1) MB SDRAM (Kingmax KSV884T4A1A-07) DRAM 384 KB included in Althon CACHE SIZE 192 KB included in Duron Onboard VGA DISPLAY Onboard IDE (Quantum AS30000AT 30GB) STORAGE Windows 2000 + SP1 + DirectX8 O.S. Display Driver at 1024 x 768 x 64k colors x 75Hz. DRIVER Processor Winbench99...
  • Page 37: Block Diagram

    7ZMMH Motherboard Block Diagram 2X/4X AGPCLK (66MHz) On Chip PCI Bus 33MHz CT5880 AC97 3 PCI CODEC PCI (33MHz) AGPCLK (66MHz) PCI (33MHz) 48MHz 14.318MHz CPUCLK (100/133MHz) AMD-K7 System Bus 100/133MHz VT8365A 100/133MHz AGPCLK (66MHz) 33MHz 14.318MHz 48MHz VT82C 686B Floppy LPT Port PS/2...
  • Page 38: Suspend To Ram Installation

    Suspend To RAM Installation A.1 Introduce STR function: Suspend-to-RAM (STR) is a Windows 98 ACPI sleep mode function. When recovering from STR (S3) sleep mode, the system is able, in just a few seconds, to retrieve the last “state” of the system before it went to sleep and recover to that state.
  • Page 39 7ZMMH Motherboard Step 2: (If you want to use STR Function, please set jumper JP7 Pin1-2 (Closed.) Step 3: Power on the computer and as soon as memory counting starts, press <Del>. You will enter BIOS Setup. Select the item “POWER MANAGEMENT SETUP”, then select “ACPI Standby State: S3 /STR”.
  • Page 40 A.3 How to put your system into STR mode? There are two ways to accomplish this: Choose the “Stand by” item in the “Shut Down Windows” area. A. Press the “Start” button and then select “Shut Down” B. Choose the “Stand by” item and press “OK” Suspend to RAM Installation...
  • Page 41 7ZMMH Motherboard Define the system ”power on” button to initiate STR sleep mode: A. Double click “My Computer” and then “Control Panel” B. Double click the “ Power Management” item.
  • Page 42 C. Select the “Advanced” tab and “Standby” mode in Power Buttons. D. Restart your computer to complete setup. Now when you want to enter STR sleep mode, just momentarily press the “Power on” button. A.4 How to recover from the STR sleep mode? There are five ways to “wake up”...
  • Page 43 7ZMMH Motherboard A.5 Notices: In order for STR to function properly, several hardware and software requirements must be satisfied: Your ATX power supply must comply with the ATX 2.01 specification (provide more than 720 mA 5V Stand-By current). Your SDRAM must be PC-100/PC-133 compliant. Jumper JP8 is provided to connect to the STR LED in your system chassis.
  • Page 44: Four Speaker & Spdif Introduction

    Four Speaker & SPDIF Introduction Four Speaker Introduction What is Four Speaker? The Creative CT5880 audio chip can support up to 4 speaker output. If you select “Four speaker out”, Line In will be reconfigured as another line out to support a second pair of speakers.
  • Page 45 7ZMMH Motherboard c . Select “Four speaker” item. Microsoft Windows Me setup procedure: a. Go to “Control Panel” Double click “Sounds and Multimedia”.
  • Page 46 b. Select “Audio” Page, and click “Advanced” button. c. Select “Quadraphonic Speakers” and click ok. Four Speaker Application The four speaker function will only be supported in application softwares that use Microsoft DirectX and Creative EAX, for example, the game titles, software DVD player and MP3 player. Four Speaker &...
  • Page 47: Spdif Introduction

    7ZMMH Motherboard SPDIF Introduction What is SPDIF? The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby digital decoder. How to use SPDIF? a. Click your mouse right button in “My Computer” and select the “Properties” item. b.
  • Page 48 Four Speaker & SPDIF Introduction c. Click “Sound, video and game controllers” item and select the “Creative Sound Blaster PCI128” item. d. Click “Settings” item and select the “Output Mode” item.
  • Page 49 7ZMMH Motherboard e. Click “Digital” item, Line Out will be reconfigure to SPDIF Out. f. Recommend you to select “Autosense”, It will automatically detect the type (mono or stereo) of the audio connector that you plug into Line Out audio jack, then configure Line Out to either SPDIF or Speaker accordingly.
  • Page 50: Bios Tm Introduction

    Or you may want to keep a backup for your current BIOS, just choose “Save Current BIOS” to save it first. You make a wise choice to use Gigabyte, and @BIOS your BIOS smartly. You are now worry free from updating wrong BIOS, and capable to maintain and manage your BIOS easily.
  • Page 51: Page Index For Bios Setup

    7ZMMH Motherboard Page Index for BIOS Setup The Main Menu Standard CMOS Setup BIOS Features Setup Chipset Features Setup Power Management Setup PNP/ PCI Configuration Load BIOS Defaults Load Setup Defaults Integrated Peripherals Hardware Monitor & MISC Setup Supervisor Password / User Password IDE HDD Auto Detection Save &...
  • Page 52: Entering Setup

    BIOS Setup BIOS Setup is an overview of the BIOS Setup Interface. The interface allows users to modify the basic system configuration, which is stored in battery-backed CMOS RAM so that it retains the Setup information can be retained when the power is turned off. ENTERING SETUP Power ON the computer and press <Del>...
  • Page 53: Getting Help

    7ZMMH Motherboard GETTING HELP Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item.
  • Page 54 Power Management Setup This setup page includes all the adjustable items of Green function features. PnP/PCI Configuration This setup page includes all the adjustable configurations of PCI & PnP ISA resources. Load BIOS Defaults Load BIOS Defaults option loads preset system parameter values to set the system in its most stable configurations.
  • Page 55: Standard Cmos Setup

    7ZMMH Motherboard Standard CMOS Setup The items in Standard CMOS Setup Menu (Figure 2) are divided into 10 categories. Each category includes none, one or more than one setup items. Use the arrows to highlight the item and then use the <PgUp> or <PgDn> keys to select the value in each item. AMIBIOS SETUP –...
  • Page 56 Time The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00. Primary Master / Slave, Secondary Master / Slave The category identifies the type of hard disk from drive C to F that has been installed in the computer.
  • Page 57: Extended Memory

    7ZMMH Motherboard Boot Sector Virus Protection If it is set to enable, the category will flash on the screen when there is any attempt to write to the boot sector or partition table of the hard disk drive. The system will halt and the following error message will appear in the mean time.
  • Page 58: Bios Features Setup

    BIOS Features Setup AMIBIOS SETUP – BIOS FEATURES SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved 1st Boot Device 2nd Boot Device 3rd Boot Device S.M.A.R.T. for Hard Disks BootUp Num-Lock Floppy Drive Seek Password Check 1st / 2nd / 3rd Boot Device Floppy Set your boot device priority to Floppy.
  • Page 59: Password Check

    7ZMMH Motherboard Boot Up Num-Lock Keypad is number keys. (Default Value) Keypad is arrow keys. Floppy Drive Seek During POST, BIOS will determine if the floppy disk drive installed is 40 or 80 tracks. 360 type is 40 tracks while 720 , 1.2 and 1.44 are all 80 tracks. Enabled BIOS searches for floppy disk drive to determine if it is 40 or 80 tracks.
  • Page 60: Chipset Features Setup

    Chipset Features Setup We would not suggest you change the chipset default setting unless you really need it. AMIBIOS SETUP – CHIPSET FEATURES SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Configure Timing by SPD DRAM Frequency SDRAM CAS# Latency AGP Mode AGP Comp.
  • Page 61: Usb Controller

    7ZMMH Motherboard AGP Comp. Driving Auto Set AGP Comp. Driving to Auto. (Default Value) Manual Set AGP Comp. Driving to Manual. If AGP Comp. Driving is Manual. Manual AGP Comp. Driving: AGP Fast Write Enabled Enable this function only if the AGP Card support Fast Write Function. (Enable this function can increase AGP performance).
  • Page 62: Power Management Setup

    Power Management Setup AMIBIOS SETUP – POWER MANAGEMENT SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved ACPI Standby State USB Dev Wakeup From S3~S5 Suspend Time Out (Minute) Display Activity IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ11 IRQ13 IRQ14 IRQ15...
  • Page 63 7ZMMH Motherboard Display Activity Ignore System will ignore display activity and enter suspend mode. (Default Value) Monitor System will not enter suspend mode when there is display activity. IRQ3~IRQ15 Ignore Ignore IRQ3 ~IRQ15. Monitor IRQ3~IRQ15 event can wake up the system from sleep state (S1). Soft-off by Power Button Instant off The user press the power button once, he can turn off the system.
  • Page 64 If the default value is Enabled. RTC Alarm Date: RTC Alarm Hour: RTC Alarm Minute: RTC Alarm Second: Every Day, 1~31 0~23 0~59 0~59 BIOS Setup...
  • Page 65: Pnp/Pci Configuration

    7ZMMH Motherboard PNP/PCI Configuration AMIBIOS SETUP – PNP / PCI CONFIGURATION ( C ) 1999 American Megatrends, Inc. All Rights Reserved VGA Frame Buffer Size VGA Boot from PCI Slot 1 IRQ Priority PCI Slot 2 IRQ Priority PCI Slot 3 IRQ Priority IRQ 3 IRQ 4 IRQ 5...
  • Page 66 The system will reserved IRQ7 for PCI slot 1 / 2 / 3 device if no legacy ISA device using IRQ7. The system will reserved IRQ9 for PCI slot 1 / 2 / 3 device if no legacy ISA device using IRQ9. The system will reserved IRQ10 for PCI slot 1 / 2 / 3 device if no legacy ISA device using IRQ10.
  • Page 67: Load Bios Defaults

    7ZMMH Motherboard Load BIOS Defaults AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24b ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP/PCI CONFIGURATION LOAD BIOS DEFAULTS LOAD SETUP DEFAULTS ESC : Quit : Select Item F6 : Load BIOS Defaults...
  • Page 68: Load Setup Defaults

    Load Setup Defaults AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24b ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP Load SETUP Defaults (Y/N)? N PNP/PCI CONFIGURATION LOAD BIOS DEFAULTS LOAD SETUP DEFAULTS ESC : Quit : Select Item...
  • Page 69: Integrated Peripherals

    7ZMMH Motherboard Integrated Peripherals AMIBIOS SETUP – INTEGRATED PERIPHERALS ( C ) 1999 American Megatrends, Inc. All Rights Reserved OnBoard FDC OnBoard Serial Port 1 OnBoard IR Port Serial Port2 Mode Duplex Mode OnBoard Parallel Port Parallel Port Mode Parallel Port DMA Parallel Port IRQ OnBoard IDE OnBoard AC’97 Audio...
  • Page 70 Serial Port2 Mode IrDA Onboard I/O chip supports IrDA. (Default Value) ASK IR Onboard I/O chip supports ASK IR. Duplex Mode IR Function Duplex Half. Half Duplex Disable this function. (Default Value) IR Function Duplex Full. Full Duplex OnBoard Parallel port Set On Board LPT port and address to 378.
  • Page 71 7ZMMH Motherboard OnBoard IDE Disabled Disable OnBoard IDE. Both Both Primary & Secondary IDE channel will be enabled. (Default Value) Primary Only Primary IDE channel is enable. Secondary Only Secondary IDE channel is enable. OnBoard AC’97 Audio Auto BIOS will search AC97 Codec. If found, AC97 function will be enabled. If no AC97 Codec found, AC97 function will be disabled.
  • Page 72: Hardware Monitor & Misc Setup

    Hardware Monitor & MISC Setup AMIBIOS SETUP – HARDWARE MONITOR & MISC SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved CPU Temperature System Temperature CPU Fan Speed System Fan Speed Vcore Vcc3 +5.000V +12.000V Figure 10: Hardware Monitor & MISC Setup CPU Temperature.
  • Page 73: Set Supervisor / User Password

    7ZMMH Motherboard Set Supervisor / User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24b ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP...
  • Page 74: Ide Hdd Auto Detection

    IDE HDD AUTO Detection AMIBIOS SETUP – STANDARD CMOS SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yyyy) : Mon Feb 05, 2001 Time (hh/mm/ss) : 10:36:24 TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE Pri Master : Not Installed Pri Slave : Not Installed Sec Master : Not Installed...
  • Page 75: Save & Exit Setup

    7ZMMH Motherboard Save & Exit Setup AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24b ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP/PCI CONFIGURATION SAVE to CMOS and EXIT(Y/N)? Y LOAD BIOS DEFAULTS LOAD SETUP DEFAULTS ESC : Quit...
  • Page 76: Exit Without Saving

    Exit Without Saving AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24b ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP/PCI CONFIGURATION Quit without saving (Y/N) ? N LOAD BIOS DEFAULTS LOAD SETUP DEFAULTS ESC : Quit : Select Item...
  • Page 77: Technical Support / Rma Sheet

    7ZMMH Motherboard Technical Support / RMA Sheet Customer/Country: Company: Contact Person: Model name/Lot Number: BIOS version: Hardware Mfs. Model name Size: Configuration Memory Brand Video Card Audio Card CD-ROM / DVD-ROM Modem Network AMR / CNR Keyboard Mouse Power supply Other Device Problem Description: Phone No.:...
  • Page 78: Appendix

    Appendix Appendix A: VIA VT8365/VT8364 Chipsets Driver Installation A.VIA 4 in 1 Service Pack Utility: Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen. 1.Click “VIA 4in 1 Service Pack Driver”...
  • Page 79 7ZMMH Motherboard 8.Click “Next”. 7.Click “Next”. 9.Click “Finish” to restart computer. (10)
  • Page 80 B.VT8365/VT8364 VGA Driver: Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen. 1.Click “VT8365/VT8364 VGA Driver” item. 3.Click “Next”. 4.Click “Finish” to restart computer. 2.Click “Next”.
  • Page 81 7ZMMH Motherboard Appendix B: Creative Sound Driver Installation Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen . Press “Audio” icon. 1.
  • Page 82 7.Click here. Appendix 8.Click”Next”. 9.Click “Finish” to restart computer. (10)
  • Page 83 7ZMMH Motherboard Appendix C: VIA AC’97 Audio Driver (Optional) Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen . Press “Audio” icon. 1.Click “VIA AC’97 Audio Driver”...
  • Page 84 Appendix D: BIOS Flash Procedure BIOS update procedure: If your OS is Win9X, we recommend that you used Gigabyte @BIOS Click “Tool”. Click “@BIOS Writer v1.06”. Click “ ”. Methods and steps: I. Update BIOS through Internet a. Click "Internet Update" icon b.
  • Page 85 In method I, if the BIOS file you need cannot be found in @BIOS onto Gigabyte's web site for downloading and updating it according to method II. d. Please note that any intercorruption during updating will cause system unbooted...
  • Page 86 Format a bootable system floppy diskette by the command “format a:/s” in command mode. Visit the Gigabyte website at http:// need and download it to your bootable floppy diskette. Insert the bootable diskette containing the BIOS file into the floppy diskette driver.
  • Page 87 7ZMMH Motherboard Appendix E: Issues To Beware Of When Installing AMR Please use inverse AMR card like the one in order to avoid mechanical problem. (See Figure A) PCI Slot Figure A: Inverse AMR Card PCI Slot Figure B: Non inverse AMR Card...
  • Page 88 Appendix F: Acronyms Acronyms Meaning ACPI Advanced Configuration and Power Interface Advanced Power Management Accelerated Graphics Port Audio Modem Riser Advanced Communications Riser BIOS Basic Input / Output System Central Processing Unit CMOS Complementary Metal Oxide Semiconductor CRIMM Continuity RIMM Communication and Networking Riser Direct Memory Access Desktop Management Interface...
  • Page 89 7ZMMH Motherboard Acronyms Meaning Original Equipment Manufacturer PCI A.G.P. Controller POST Power-On Self Test Peripheral Component Interconnect RIMM Rambus in-line Memory Module Special Circumstance Instructions SECC Single Edge Contact Cartridge SRAM Static Random Access Memory Symmetric Multi-Processing System Management Interrupt Universal Serial Bus Voltage ID...

This manual is also suitable for:

7zmmh

Table of Contents