Gigabyte 7CN700ID User Manual page 11

1) Power Connector (2x10 pin ATX )
With the use of the power connector, the power supply can supply enough stable power to all the
components on the motherboard. Before connecting the power connector, please make sure that all
components and devices are properly installed. Align the power connector with its proper location on
the motherboard and connect it tightly.
Caution!
Please use a power supply that is able to handle the system voltage requirements. It is recommended
that a power supply that can withstand high power consumption be used (300W or greater). If a power
supply is used that does not provide the required power, the result can lead to an unstable system or
a system that is unable to start.
10 20
11
1
Pin No. Definition
1 3.3V
2 3.3V
3 GND
4 +5V
5 GND
6 +5V
7 GND
8 Power Good
9 5V SB (stand by +5V)
10 +12V
11 3.3V
12 -12V
13 GND
14 PS_ON(soft on/off)
15 GND
16 GND
17 GND
18 -5V
19 +5V
20 +5V
- 11 - Hardware Installation