Windows ® Xp - D-Link DSL-2320B - 24 Mbps DSL Modem User Manual

Section 4 - Configuring Your Computer
7. If prompted to restart your computer with the new settings, click OK.
8. After your computer restarts, click on the Network and Dial-up Connections icon again, and right click
on the Local Area Connection icon and then select Properties.
9. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP) and then click on
Properties.
10. In the Internet Protocol (TCP/IP) Properties dialog box, click in the radio button labeled Use the following
IP address and type 19.168.1.x (where "x" is any number between  and 54) and 55.55.55.0 in
the IP address field and Subnet Mask field.
11. Click on OK twice to save your changes and then close the Control Panel.
1. In the Windows taskbar, click on the Start button then go to Control Panel and then click Network
Connections.
. In the Network Connections window, right-click on the Local Area Connection icon and click on
Properties.
3. Listed in the Local Area Connection window are the installed network components. Make sure the box
for Internet Protocol (TCP/IP) is checked and then click on Properties.
4. In the Internet Protocol (TCP/IP) Properties dialog box, click on the radio button labeled Use the following
IP address and type 19.168.1.x (where x is any number between  and 54) for the IP address field
and 55.55.55.0 for the Subnet Mask field.
5. Click on OK twice to save your changes and then close the Control Panel.
D-Link DSL-30B ADSL+ Ethernet/USB Modem User Manual
Windows XP
®
15