Using Rapid Text Entry; Entering Symbols - Kyocera 3035 - QCP Cell Phone Reference Manual

Entering letters, numbers, and symbols
Using rapid text entry
®
®
Tegic T9
example, to enter the word "how," press keys
The software suggests words as you type.
Wait until you have typed the entire word before checking the screen to see if the
I
word shown is correct.
Press
I
Once you see the correct word, press
I
continue entering text.
For more instructions on how to use Tegic T9 rapid text entry, go to
I
www.tegic.com.
T9 Text Input is only available for the English language on this phone.
Note
Rapid text entry example
®
The following steps describe how to enter the name "Jane":
Wait until you have typed the entire word before checking the screen to see if the word
Tip
shown is correct. In the example below, the word "Jane" will not appear immediately; look at
the keypad, not the phone screen, as you enter letters.
1. When you are in the text entry screen, select T9 rapid text entry mode. (See
"Changing text entry modes" on page
2. Make sure
appear, press
3. Press
4. Press
to it.
5. Press
and the letter "n" appears next to it.
6. Press
Entering symbols
1. From the text entry screen, press
the screen.
2. Press
3. Press
4. Press
5. Highlight
22
Text Input rapid text entry mode allows you to enter text quickly. For
to see alternate word choices.
appears next to
three times.
once. The letter "k" appears.
once. The first letter changes to a "l" and the letter "a" appears next
once. The first letter changes to a "j", the second letter remains an "a,"
twice. The letter "e" appears.
right to the text entry mode you are currently using.
in to select the mode.
down to scroll through the list of modes.
Symbols, then press
→
right or to move the cursor and
21).
at the bottom of the screen. If it does not
®
to highlight the options at the bottom of
to select it.
Reference Guide for the QCP 3035 Phone
→
in this order.