Silencing The Ringer Or Alert; Muting And Unmuting A Call; Adjusting The Volume - Kyocera 3035 - QCP Cell Phone Reference Manual

Basic Functions

Silencing the ringer or alert

To silence the ringer or stop the vibration alert during an incoming call, press
I
. Press
To silence all sounds for quiet environments, see
Tip

Muting and unmuting a call

You can turn mute on during a call so that you can hear everything your caller is
saying, but they cannot hear you.
To turn Mute on during a call, press
I
screen.
I
If you do not see Mute at the bottom of the screen, press
Note
screen. Mute appears at the bottom of the home screen.
To turn Mute off during a call, press
I
the screen.

Adjusting the volume

To manually adjust the earpiece volume during a call, press
I
To enable SmartSound
I
volume based on the amount of noise around you or the other person's voice
volume level:
1. Place a call from a quiet environment.
2. During the call, press
level.
When the call is finished:
1. Select Menu
2. Select one of the following:
I
I
You can still manually adjust the earpiece volume when SmartSound is on.
Note
10
to answer the call.
™
, the feature that automatically adjusts the earpiece
→
Settings
Enabled—Adjusts the volume automatically. The volume you have just
set is used as a baseline. You can manually adjust the volume during a
call.
Disabled—Keeps the volume level the same unless you manually adjust
it using .
"Silence All" on page
to select Mute from the bottom of the
to select UnMute from the bottom of
up or down to set the volume to a comfortable
→ →
Sounds Smart Sound.
Reference Guide for the QCP 3035 Phone
28.
to go back to the home
up or down.