Note:
Smart Zoom can only be re-enabled when it is activated at the top of this
page. With Smart Zoom turned off, neither does the Follow button appear, nor
will the view return to its previous state if you zoom or tilt the map.
Delay before restoring
You can set the timeout for both Restore Lock-to-Position and Restore Smart Zoom here.
Shorter delays are best if you tend to accidentally change the map display, but you
may prefer a longer delay if you often look for things around your position while
driving.
Remember to only look at the display if it is absolutely safe to do so.
Note:
If you push the Follow button before the automatic Lock comes into effect,
Smart Zoom and Lock-to-Position will be re-enabled instantly.
Route options
You can set the basic route parameters on the Route Parameters settings screen
described in Page 8 . On this screen you have some more ways to influence route
planning and route recalculation.
Off-route sensitivity and Recalculation delay
Depending on the quality of your GPS device, the GPS antenna location in the car
and the environment you are driving in, route recalculation can behave differently. HP
iPAQ Trip Guide may think you have departed the proposed route and perform a
recalculation even if you have not done so.
5
97