Find A Poi - HP 914c - iPAQ Business Messenger Smartphone Navigation Manual

When you enter this page, the coordinates of the current GPS position (or the selected
map point, the Cursor, if Lock-to-Position is inactive) are shown at the top of the
display.
The coordinates are always shown in the format configured in Advanced settings /
Display options (Page 9 ), but you can enter the coordinates in any of the three
formats. You can even enter the latitude and longitude in different formats.
Entering a latitude/longitude pair is easy. The left field contains the latitude. It starts
with an 'N' (North) or 'S' (South) letter. This tells HP iPAQ Trip Guide whether the
point is in the Northern or the Southern hemisphere. Use the
hemisphere. Enter numbers for the latitude. Use the decimal point if the degrees,
minutes or seconds are not integers. Use the
depends on the current cursor position inside the latitude) to start entering minutes after
degrees or seconds after minutes.
When finished, tap the longitude on the right, and enter it as you did latitude. This
time the hemisphere-changing button
is located East or West from the meridian crossing Greenwich, UK.
Once you have entered both numbers, press Done to make the selection.
Tip
: The quickest way to tell the coordinates of a point is to select it by tapping
on the map or by using Find, and then come to this page and read the
coordinates.
Tip
: If you need to reformat coordinates to the format selected in HP iPAQ Trip
Guide (Page 93), enter the coordinates in the format you have, press Done to
show it in the map, then come back here to see the same location in the chosen
coordinate display format.

Find a POI

You can select your destination from the thousands of POIs included with HP iPAQ Trip
Guide or from the ones you have previously created. This screen helps you find the
one you are looking for. POI items are categorised to let you locate them more easily.
3
tells HP iPAQ Trip Guide whether the point
button to change the
/ / button (the label
113