HP 914c - iPAQ Business Messenger Smartphone Navigation Manual page 64

• Delete: you can delete a track log if it is not needed any more. HP iPAQ Trip
Guide will ask you to confirm this action.
• Track log options: this button in the upper right corner leads to a settings screen
where you can set up the track logging parameters:
• Update interval: is how often track points will be saved. Position information
is normally received once a second from the GPS. If you do not need such a
detailed log, you can increase this number to save track log space.
• Current autosave track size: this figure shows how much memory is used by
the automatically saved track logs.
• Enable auto-saving: when auto-saving is enabled, you do not need to turn
track log saving on and off manually. HP iPAQ Trip Guide will automatically start
recording the track log as soon as GPS position is available.
• Limit track DB size: here you can set whether or not to maximise the size of
the database where the automatically saved track logs are kept.
• Maximum track database size: here you can set the maximum database
size if the track database size limit is enabled using the previous switch.
• Create NMEA/SIRF log: independently of the normal track log, you can
instruct HP iPAQ Trip Guide to record the native GPS data received from the GPS
device. HP iPAQ Trip Guide is capable of working with GPS devices using either
the NMEA or the SiRF protocol, so the saved data will be in one of these formats.
These logs are saved as separate text files on the SD card, and they cannot be
shown or replayed in HP iPAQ Trip Guide. They are for post-processing needs,
should you have any. Be careful when saving native GPS data, as it can soon eat
up available memory.
64