Table of Contents
Advertisement
2-1 Overview
This chapter provides a quick setup checklist to get your 2041M-32R+/2041M-T2R+
up and running. Following these steps in the order given should enable you to have
the system operational within a minimum amount of time. This quick setup assumes
that your system has come to you with the processors and memory preinstalled. If
your system is not already fully integrated with a serverboard, processors, system
memory etc., please turn to the chapter or section noted in each step for details
on installing specifi c components.
2-2
Unpacking the System
You should inspect the box the AS2041M-32R+/2041M-T2R+ was shipped in and
note if it was damaged in any way. If the server itself shows damage you should
fi le a damage claim with the carrier who delivered it.
Decide on a suitable location for the rack unit that will hold the AS2041M-32R+/
2041M-T2R+. It should be situated in a clean, dust-free area that is well ventilated.
Avoid areas where heat, electrical noise and electromagnetic fi elds are generated.
You will also need it placed near a grounded power outlet. Be sure to read the
Rack and Server Precautions in the next section.
2-3
Preparing for Setup
The box the AS2041M-32R+/2041M-T2R+ was shipped in should include two sets
of rail assemblies, two rail mounting brackets and the mounting screws you will
need to install the system into the rack. Follow the steps in the order given to
complete the installation process in a minimum amount of time. Please read this
section in its entirety before you begin the installation procedure outlined in the
sections that follow.
Chapter 2
Server Installation
2-1
Chapter 2: Server Installation
Advertisement
Table of Contents
