Table of Contents
Advertisement
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors, virus protection and BIOS rescue.
1-3
Server Chassis Features
The 4041M-32R+ is a high-end, scaleable server platform. The following is a general
outline of the main features of the SC748TQ-R1200 server chassis.
System Power
The SC748TQ-R1200 features a redundant 1200W power supply composed of two
separate power modules. This power redundancy feature allows you to replace a
failed power supply without shutting down the system.
SAS Subsystem
The SAS subsystem supports up to eight 3 Gb/sec SAS hard drives, which are hot-
swappable. The SAS drives are connected to a SAS backplane. A RAID controller
card can be used with the backplane to provide data security. Note: The operating
system you use must have RAID support to enable the hot-swap capability of the
SAS drives. For documentation on SAS RAID, please refer to the LSI manual on
the driver CD that came with the system.
SATA Subsystem
The SATA subsystem supports up to six 3 Gb/sec SATA hard drives, which are hot-
swappable. The SATA drives are connected to a SATA backplane. A RAID controller
card can be used with the backplane to provide data security. Note: The operating
system you use must have RAID support to enable the hot-swap capability of the
SATA drives.
PCI Expansion Slots
The SC748TQ-R1200 chassis supports the use of up to seven standard size (full-
height, full-length) expansion cards.
Front Control Panel
The control panel provides you with system monitoring and control. LEDs indicate
system power, power fail, HDD activity, network activity and overheat/fan fail. A main
power button and a system reset button are also included.
Chapter 1: Introduction
1-3
Advertisement
Table of Contents
