Western Digital 13000RTL - 13 GB Caviar Drive Installation Manual page 19

5. Select Installation Type as Add the drive as an additional device. If you wish to create
customized partitions, select the box to change advanced options and check Custom
Partition.
6. The Custom Partition Setup screen below appears. Your hard drive is automatically
partitioned to the largest capacity up to 137 GB based on your operating system
limitations. If the drive contains existing partitions and you wish to create or add
partitions, you must first click Delete to remove existing partitions. To add partitions, use
the slider bar to the desired size of the partition, then click Add Partition. After
configuring the partitions, click Next.
7. The next screen outlines your setup options, number of partitions, file format, and the
size of each partition. Data Lifeguard Tools is now ready to set up your new hard drive.
Click Erase then Next.
Caution: Continuing will erase all existing data on the hard drive. If you are certain, click
Yes to proceed with format and partition.
WESTERN DIGITAL EIDE HARD DRIVE
INSTALLATION GUIDE
DATA LIFEGUARD TOOLS V11.0 - 15