Data Lifeguard Tools V11.0; Create A Bootable Diskette - Western Digital 13000RTL - 13 GB Caviar Drive Installation Manual

Data Lifeguard Tools v11.0

3
Western Digital provides Data Lifeguard Tools to assist with hard drive installation,
management, and diagnostics. The Data Lifeguard Tools software is also available at
support.wdc.com/download.
Depending on your setup and configuration, you can use either the Windows or DOS version
of Data Lifeguard Tools.
Note: The Windows and DOS versions of Data Lifeguard Tools vary slightly from one
another in text, graphic placement, or color.
Data Lifeguard Tools contents:
View Installation Tutorial - Create, view, and print a customized installation manual.
!
Set Up Your Hard Drive - Partition and format an installed hard drive; overcome the
!
137 GB, 32 GB, or 8.4 GB system BIOS limitations.
Drive-to-Drive Copy Utility - Copy all the files or a specific folder from one drive to
!
another; set a specific hard drive size.
Hard Drive Information - Configure jumper settings and other technical information
!
regarding your hard drive.
Register Online - Register your drive online (Internet connection required).
!

Create a Bootable Diskette

If your system cannot boot from a CD or you wish to use a floppy diskette instead, you can
create a bootable Data Lifeguard Tools diskette by following these instructions:
1. Insert the Data Lifeguard Tools CD into your CD-ROM drive.
a) If using the DOS version, restart the computer and boot from the CD.
b) If using the Windows version, the CD autoruns on your desktop.
2. When the setup menu appears, select Create a Data Lifeguard Bootable Installation
Diskette. Follow the directions as prompted.
WESTERN DIGITAL EIDE HARD DRIVE
INSTALLATION GUIDE
DATA LIFEGUARD TOOLS V11.0 - 9