How To Switch The Security Type (Key Cd Security/Memory Stick Security); How To Operate The Esn (Key Cd) Security; How To Program The Key Cd - Eclipse CD5000 - - Radio Owner's Manual

How to switch the security type
(Key CD security/Memory Stick
security)
You can switch the type of security being used
(Key CD security or Memory Stick security). The
initial setting is for Key CD security to be used.
Check that the main unit is in
1
standby.
Press and hold the [FUNC] button,
2
then the button [3], and hold both
for the more than two seconds.
Security type will switch from Key CD
security (DISC SEC) ↔ Memory Stick
security (MS SEC) in order each time
the button is pressed.
ATTENTION
If a security is activated, switching the
security type is not available.
How to operate the ESN (Key
CD) security

How to program the Key CD

Check that the main unit is in
1
standby.
Press and hold the [FUNC] button,
2
then the button [6], and hold both
for more than one second.
A [SEC] message appears, in two
seconds it will change to [DISC].
ESN security operating procedure
ATTENTION
If a CD has already been inserted, a [SEC]
message appears, and then the front panel
opens and the CD is ejected.
If a security is activated, programing the Key
CD is not available.
3
Press the [CD
The front panel opens; The CD5000 is
now ready for your Key CD in the CD
slot.
Insert the CD into the slot.
4
A [SEC] message appears, then the
Key CD is ejected.
5
Press the [CD
The front panel closes.
ATTENTION
• If there is a problem with the inserted CD,
an [ERR] message will appear for two
seconds and the CD will be ejected.
Reinsert the ejected CD.
• If a CD causes the [ERR] message to
appear twice in a row, a [CHANGE]
message will appear for two seconds. Try
another CD.
• Copy Protected CD and MP3/WMA CD-ROM
cannot be programed for Key CD security.
• The Security indicator will flash whenever
the vehicle's ignition is switched off.
] button.
] button.
35
VIII