2
3
1 optical drive
4 system board
connector
9 Replace the bezel (see "Replacing the Bezel" on page 125).
10 Replace the computer cover (see "Replacing the Computer Cover" on
page 166).
NOTICE:
and then plug it into the computer.
11 Connect your computer and devices to their electrical outlets, and turn
them on.
See the documentation that came with the drive for instructions on
installing any software required for drive operation.
146
Removing and Installing Parts
1
2
5
To connect a network cable, first plug the cable into the network device
data cable
screw holes in the
optical drive bay (2)
6
5
4
3
power cable
6
screws (2)