Dell Vostro 400 Owner's Manual page 136

8 If you are not replacing the drive, reinstall the drive panel insert (see
"Replacing the Floppy Drive Panel Insert" on page 139).
9 Replace the computer cover (see "Replacing the Computer Cover" on
page 166).
10 Connect your computer and devices to electrical outlets, and then turn
them on.
11 Check the system setup for the appropriate diskette Drive Option changes
(see "Entering System Setup" on page 174).
Installing a Floppy Drive
1 Follow the procedures in "Before You Begin" on page 101.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 103).
3 Remove the bezel (see "Removing the Bezel" on page 123).
4 If you are installing a new floppy drive rather than replacing a drive, align
the tip of a Phillips screwdriver with the slot on the break-away metal plate
and rotate the screwdriver outwards to break the metal plate.
5 Gently slide the floppy drive into place in the FlexBay slot.
6 Align the screw holes in the floppy drive with the screw holes in the
FlexBay.
136
Removing and Installing Parts