Computer Setup—Boot
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-4
Computer Setup—Boot
Option
Boot-time Diagnostic
Screen
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Floppy Group Boot
Priority
CD-ROM Group Boot
Priority
Hard Drive Group Boot
Priority
Network Group Boot
Priority
ESC:Boot Menu
F9:Diagnostics
F10:Setup
F11:Recovery
F12:Boot from LAN
Computer Setup—Exit
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-5
Computer Setup—Exit
Option
Exit Saving Changes
Exit Discarding
Changes
Load Setup Defaults
8
Chapter 2 Computer Setup (F10) Utility
Description
Disables/enables POST diagnostic messages display.
Allows you to specify which device groups will boot first, second, third, and fourth or to disable any
of the four:
●
Floppy Group
●
CD-ROM Group
●
Hard Drive Group
●
Network Boot Group
NOTE:
MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating
system has started.
Specifies boot device priority within removable devices.
Specifies boot device priority within CD/DVD drives.
Specifies boot device priority within hard drives.
Specifies boot device priority within bootable network devices.
Disables/enables the Esc key boot menu during POST.
Disables/enables the F9 key diagnostics function during POST.
Disables/enables the F10 key computer setup function during POST.
Disables/enables the F11 key system recovery function during POST.
Disables/enables the F12 key boot from LAN during POST.
Description
Press
Enter
to exit saving changes.
Press
Enter
to exit discarding changes.
Press
Enter
to load setup defaults.