System Fan - HP dx2310 - Microtower PC Service & Reference Manual

Removal and Replacement Procedures— Microtower (MT) Chassis

6.9 System Fan

1. Prepare the computer for disassembly
2. Remove the access panel
(MT chassis)").
3. Disconnect the cable that connects the system fan to the system board.
4. Remove the four screws that secure the fan to the chassis and remove the fan.
To install the fan, reverse the removal procedures.
6–18
(Section 6.1, "Preparation for
(Section 6.2, "Remove the computer access panel and front bezel
490778-001
Disassembly").
Service Reference Guide