HP dx2310 - Microtower PC Service & Reference Manual page 20

Setup Utilities and Diagnostics Features
Computer Setup (Continued)
Heading
PnP/PCI
Configurations
(continued)
Hardware
Monitor Setup
Load Defaults
Setting
Set Supervisor
Password
Set User
Password
Save Setting
and Exit
Exit Without
Saving
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.
2–12
Option
Resources Controlled By
IRQ Resources
• IRQ-3 assigned to
• IRQ-4 assigned to
• IRQ-5 assigned to
• IRQ-7 assigned to
• IRQ-9 assigned to
• IRQ-10 assigned to
• IRQ-11assigned to
• IRQ-12 assigned to
• IRQ-14 assigned to
• IRQ-15 assigned to
CPU Fan Speed
System Temperature
System Fan Speed
CPU Fan Fault Detect
SYS Fan Fault Detect
490778-001
Description
Allows you to select whether resources are
controlled automatically or manually:
• Auto (ESCD–Extended Storage Configuration
Data)
• Manual
BIOS can automatically configure all the
bootable and Plug-and-Play-compatible
devices. If you choose Auto, you cannot
select IRQ, DMA and memory base address
fields since BIOS automatically assigns them.
When resources are controlled manually,
allows you to assign each system interrupt a
type, depending on the type of device using
the interrupt.
Legacy ISA for devices compliant with the
original PC AT bus specification, PCI/ISA
PnP for devices compliant with the Plug-and-
Play standard whether designed for PCI or
ISA bus architecture.
(view only)
(view only)
(view only)
Disables/enables detection of CPU failure
during POST.
Disables/enables detection of Fan failure
during POST.
Allows you to reset Computer Setup to
factory defaults.
Allows you to establish a password to control
access to Computer Setup.
Allows you to establish a password to control
access to the computer.
Allows you to save current settings and exit
Computer Setup.
Allows you to exit Computer Setup without
saving changes.
Service Reference Guide