Computer Setup-Advanced Bios Features - HP dx2200 - Microtower PC Utility Manual

Hp compaq dx2200 microtower pc - computer setup (f10) utility guide
Hide thumbs Also See for dx2200 - Microtower PC:
Table of Contents

Advertisement

Computer Setup—Advanced BIOS Features
NOTE:
configuration.
Table 4
Computer Setup—Advanced BIOS Features
Option
Device Boot Disabling
F9 Boot Menu
Factory Recovery Boot Enabling this feature will cause an additional prompt, F11 = Recovery, to be displayed during POST
F11 Prompt
Hard Disk Boot Seq.
Network Boot Seq.
First Boot Device
Second Boot Device
Third Boot Device
Fourth Boot Device
Boot Up NumLock
Status
6
Computer Setup (F10) Utility
15 seconds
30 seconds
Support for specific Computer Setup options may vary depending on the hardware
Description
Allows you to restrict a device from booting the unit. You can disable as a bootable device:
None
USB
Internal ODD
Internal FDD
USB + ODD + FDD
Disables/enables F9 Boot Menu.
on systems with HP Backup and Recovery software installed and configured with a recovery partition
on the boot hard drive. Pressing F11 causes the system to boot to the recovery partition and launch
HP Backup and Recovery. The F11 = Recovery prompt can be hidden with the F11 prompt (hidden/
displayed) option.
Setting this feature to displayed will display the text F11 = Recovery during POST. Hiding this feature
prevents the text from being displayed. However, pressing F11 will still attempt to boot to the HP
Backup and Recovery partition.
Allows you to specify the order of attached hard drive devices (such as USB HDD storage, USB2
Drive Key, or USB flash media). The first drive in the order has priority in the boot sequence and is
recognized as drive C (if any devices are attached).
Allows you to specify the order in which network devices (including UP NIC cards) are checked for
a bootable operating system image.
Allows you to specify which devices will boot first, second, third, and fourth or to disable any of the
four:
Removable
Hard Disk
CDROM
Network
Disabled
NOTE:
MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating
system has started.
Allows you to set the default NumLock status to off or on.
ENWW

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compaq dx2200

Table of Contents