HP dc5100 - Microtower PC Service & Reference Manual page 18

Setup Utilities and Diagnostics Features
Heading Option
Security Smart Cover
(continued)
Embedded
Security
Device Security
Network Service
Boot
System IDs
✎
Support for specific Computer Setup options may vary depending on the hardware configuration.
2–8
Allows you to:
• Lock/unlock the Cover Lock.
• Set the Cover Removal Sensor to Disable/Notify User/Setup
Password.
✎
Notify User alerts the user that the sensor has detected that the
cover has been removed. Setup Password requires that the setup
password be entered to boot the computer if the sensor detects
that the cover has been removed.
This feature is supported on select models only. See the Desktop
Management Guide on the Documentation CD for more
information.
Allows you to:
• Enable/disable the Embedded Security device.
• Reset the device to Factory Settings.
This feature is supported on select models only. See the Desktop
Management Guide on the Documentation CD for more
information.
Enables/disables serial ports, parallel port, front USB ports, system
audio, network controllers (some models), MultiBay devices (some
models), SMBus controller (some models), and SCSI controllers
(some models).
Enables/disables the computer's ability to boot from an operating
system installed on a network server. (Feature available on NIC
models only; the network controller must reside on the PCI bus or be
embedded on the system board.)
Allows you to set:
• Asset tag (18-byte identifier) and ownership Tag (80-byte
identifier displayed during POST).
See the Desktop Management Guide on the Documentation CD
for more information.
• Chassis serial number or Universal Unique Identifier (UUID)
number. The UUID can only be updated if the current chassis
serial number is invalid. (These ID numbers are normally set in
the factory and are used to uniquely identify the system.)
• Keyboard locale setting (for example, English or German) for
System ID entry.
376220-001
Description
Service Reference Guide, dc5100