Chassis Fan - HP dc5100 - Microtower PC Service & Reference Manual

Removal and Replacement Procedures— Small Form Factor (SFF) Chassis

7.18 Chassis Fan

1. Prepare the computer for disassembly
2. Remove the computer cover
3. Remove the fan shroud
4. Disconnect the chassis fan cable from the system board.
5. Remove the four screws that secure the fan and fan guard to the chassis then, remove the fan
from the chassis.
.
To install the chassis fan, reverse the removal procedure.
7–46
(Section 7.1, "Preparation for
(Section 7.4, "Computer
(Section 7.10, "Fan Shroud").
376220-001
Disassembly").
Cover").
Service Reference Guide, dc5100