Appendix B: Current Openserver 5.0.5 System Configuration - Compaq 386746-001 - ProLiant - 1600 Integration Notes

Migrating from SCO OpenServer™ 5.0.5 to UnixWare® 7.1 Using Compaq SmartStart v4.23
Appendix B: Current OpenServer 5.0.5
System Configuration
When SmartStart begins the System Configuration Utility, the following should appear on your
screen. Review each item and modify as appropriate.
Compaq ProLiant 1600 System Board
Primary Operating System ....................... SCO OpenServer 5
Embedded IDE Controller
Standard Interface ........................... Enabled as Second
Controller
Drive Type - Unit 1 .......................... CD-ROM
Drive Type - Unit 2 .......................... Not Installed
Advanced Features
Alternative A20 Switching .................... Enable Port 92
Software Generated NMI ....................... Disabled
Fail-Safe Timer NMI .......................... Disabled
Bus-Master Timeout NMI ....................... Disabled
Parity Error Response ........................ Enabled
Hot Plug Keyboard ............................ Enabled
Erase non-volatile memory .................... Select to erase non-
volatile
IOQ Setting .................................. IOQ = 8
F1 Boot Prompt ............................... Enabled
prompt
Hot-Plug Reservation Options ................. Normal
APIC Mode .................................... Full Table - Mapped
Slot 3 - Compaq Fast Ethernet NIC NC3120 PCI 10/100
Network Resources .............................. Enabled
Slot 4 - Compaq Fibre Channel PCI Controller
Controller Resources ........................... Enabled
Controller Order ............................... Fourth
Drive Characteristics .......................... View with Compaq
Array Configuration Utility
Slot 5 - Compaq Smart Array 3200 Controller - Bus 1
Controller Resources ........................... Enabled
Controller Order ............................... Fifth
Online Recovery Server Status .................. Disabled
Drive Characteristics .......................... View with Compaq
Array Configuration Utility
SCSI Bus Speed ................................. Auto-detection
0413-0799-A
memory
- stop at
30