Compaq 386746-001 - ProLiant - 1600 Integration Notes page 20

Migrating from SCO OpenServer™ 5.0.5 to UnixWare® 7.1 Using Compaq SmartStart v4.23
If installed, remove the appropriate packages.
Step 18: Insert the Compaq Management CD when prompted.
SmartStart loads Insight Manager and the Insight Management Agents.
Step 19: Install any relevant OS patches and supplements.
You need to install several other patches and supplements that were initiated after
SmartStart v4.23. See the section "Check for the Latest OS Patches and Supplements."
To install a patch or supplement, follow the installation instructions given in the cover
letter or documentation file.
Step 20: Install new EFS.
Use the latest version of the EFS created in section "Create EFS Diskettes" or in Step 13.
Continue with your installation.
EFS Installation
1. Log in as root.
2. Insert your first Compaq EFS diskette.
3. Enter pkgadd -d diskette1.
4. Press Enter. A list of software packages is displayed.
5. Select All. Before installation of each package, a description about the package is
0413-0799-A
ptfcpqsmu - Compaq SCSI-2 Management Utility
ptfcrom - Compaq CROM Driver
ptfcpqw - Compaq Wellness Driver
ptfcrid - Compaq Remote Insight Board Driver.
ptfcultra - Compaq Wide-Ultra SCSI Utility.
ptfidamnu - Compaq IDA Diagnostic Utility.
ptfn1000 - Compaq Gigabit NIC/Module Driver.
ptfn100c - Compaq Ethernet or Fast Ethernet NIC driver.
ptfssd - Compaq Standby Server Daemon Utility.
displayed and a confirmation is asked to install the package. See Figure 2.
20