Migrating from SCO OpenServer™ 5.0.5 to UnixWare® 7.1 Using Compaq SmartStart v4.23
5. Record the following on your diskette: (1) vendor name, (2) model, (3) line speed.
= = = =
Record your TCP/IP configuration
You should record all the existing network interfaces so that you can configure these on
your UnixWare 7.1 system.
TCP/IP Configuration Backup Procedure
1. Enter scoadmin.
2. Select Network Configuration Manager.
3. Select Protocol.
4. Select View Protocol Configuration.
5. Record the following on your diskette: (1) hostname, (2) domain name, (3) IP
Figure 1. View of current TCP/IP Configuration Select SCO TCP/IP
6. Select Advanced Options.
7.
Select Advanced Options.
8. Record (7) gateway and (8) frame format.
= = = =
Record your Network File System (NFS) information
Be sure that you have backed up all the necessary NFS files listed in Table 6.
0413-0799-A
address, (4) netmask, (5) broadcast address, (6) frame type. See Figure 1.
13