Compaq 386746-001 - ProLiant - 1600 Integration Notes page 22

Migrating from SCO OpenServer™ 5.0.5 to UnixWare® 7.1 Using Compaq SmartStart v4.23
Step 22: Configure your modem.
Step 23: Configure your TCP/IP.
Step 24: Configure your Point-To-Point Protocol (PPP).
0413-0799-A
Enter scoadmin.
Select Modem Manager.
Select Manual Configuration.
Fill in information from backup.
Select Configure Port.
Insert port configuration information.
Exit.
Enter scoadmin.
Enter Network Configuration Manager.
Select Protocols.
Select View Protocol Configuration.
Select TCP/IP as the protocol to be configured.
Add information from backup.
Select Advanced Options.
Add gateway and frame format information from backup
Exit.
Enter scoadmin.
Select WAN.
Select Network.
Select Network Configuration Manager.
Select Configure PPP.
Select Bundle.
Select Configuring Outgoing PPP.
Enter Bundle name.
Select Outgoing as the Bundle Type.
Enter the remote system name and method of initiating the link.
Select Edit to add a remote system.
Select Add.
Enter remote system name, device type, line speed and phone number.
22