Setting The Tv System; Cautions On Use - Pioneer DV320K - MULTISYSTEM REGION FREE DVD PLAYER.ALL REGIONS 0-6 Operating Instructions Manual

Additional information

Setting the TV system

 If the picture of the disc being played is
distorted, switch the TV system to the one
used in your country or region.

When the TV system is switched, the
types of discs that can be played are
limited.

The factory default setting is AUTO.
1 Turn the player's power off.
Press  STANDBY/ON.
2 Press  STANDBY/ON while pressing
.
Use the buttons on the player's front panel.
The power turns on and the TV system
switches as shown below.

AUTONTSC

NTSCPAL
 PALAUTO
Types of
Format
discs/ files
NTSC
PAL
—
no disc
Player setting
NTSC PAL AUTO
NTSC PAL NTSC
NTSC PAL PAL
NTSC or
NTSC PAL
PAL


Cautions on use

When moving the player
When moving the player, check first that
there is no disc loaded and that the disc tray
is closed. Then press  STANDBY/ON on
the player (or  STANDBY/ON on the remote
control), wait for the - OFF - indicator on the
front panel display to turn off, then unplug
the power cord. Moving the player with a disc
inside it could result in damage.
Place of installation
 Choose a stable place near the TV or ste-
reo system being used with the player.
 Do not place the player on top of a TV or
color monitor. Also install it away from
cassette decks and other devices easily
affected by magnetic forces.
Avoid the following types of places:
 Places exposed to direct sunlight

Humid or poorly ventilated places

Extremely hot places
 Places exposed to vibrations

Dusty places
 Places exposed to soot, steam or heat
(kitchens, etc.)
Do not place objects on the player.
Do not place any objects on top of the player.
Do not obstruct the ventilation holes.
Do not use the player on shaggy rugs, beds,
sofas, etc., or wrapped in cloth, etc. Doing so
will prevent the heat from dispersing, leading
to damage.
Do not expose to heat.
Do not place the player on top of an ampli-
fier or other component that generates heat.
When placing it in a rack, to avoid the heat
given off by the amplifier or other audio
component, place it on a shelf below the
amplifier.
Appendix
06
43
En