Pioneer DV320K - MULTISYSTEM REGION FREE DVD PLAYER.ALL REGIONS 0-6 Operating Instructions Manual page 39

Operating instructions
Hide thumbs Also See for DV320K - MULTISYSTEM REGION FREE DVD PLAYER.ALL REGIONS 0-6:
Table of Contents

Advertisement

Additional information
Problem
KURO LINK function does not
work.
The message CEC200 appears. Is the player's power turned off?
Check
Is the HDMI cable you are using a
High Speed HDMI cable?
Is KURO LINK set to On on the
player?
Does the connected device sup-
port the KURO LINK function?
Is KURO LINK set to On on the
connected device?
Are multiple players connected?
Remedy
Use a High Speed HDMI cable. The KURO
LINK function may not work properly if
HDMI cable other than a High Speed
HDMI™ cable is used.
Set KURO LINK to On on the player (page
32).
The KURO LINK function does not work with
devices of other brands, even if connected
using an HDMI cable.
The KURO LINK function will not work if
devices that do not support the KURO LINK
function or devices of other brands are con-
nected between the KURO LINK-compatible
device and the player.
Even when connected to a Pioneer product
compatible with the KURO LINK function,
some of the functions may not work.
Also refer to the operating instructions of
the connected device.
Set KURO LINK to On on the connected
device. The KURO LINK function operates
when KURO LINK is set to On for all devices
connected to the HDMI OUT terminal. Once
connections and settings of all the devices
are finished, be sure to check that the play-
er's picture is output to the Flat Screen TV.
(Also check after changing the connected
devices and connecting and/ or disconnect-
ing HDMI cables.) If the player's picture is
not being output to the Flat Screen TV, the
KURO LINK function may not work properly.
For details, refer to the operating instruc-
tions of the connected device.
The KURO LINK function may not work if
three or more players, including this player,
are connected by HDMI cable.
When the Disc Navigator is selected using
the Flat Screen TV's remote controller, the
message CEC200 is displayed if the player's
power is turned off.
This is not a malfunction. You may continue
using the player and Flat Screen TV as such.
Appendix
06
39
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv-420v-sDv-420v-kDv-320-s

Table of Contents