Digital Audio Out Settings - Pioneer DV320K - MULTISYSTEM REGION FREE DVD PLAYER.ALL REGIONS 0-6 Operating Instructions Manual

Section
Changing the Settings (Initial Settings)
05

Digital Audio Out settings

Options settings
HDMI Out
(DV-420V only)
 The settings can only be changed when the player and HDMI-compatible device are connected using an HDMI
cable.
 If the connected HDMI-compatible device is not compatible with DTS audio, the DTS audio signals are not
output (the DTS audio signals are not converted to linear PCM signals for output).
Digital Out
When Digital Out is set to Off, the audio signals output from the HDMI OUT terminal are converted to linear PCM
(DV-420V only).
Dolby Digital Out
DTS Out
When the connected AV receiver or amplifier does not support DTS audio, set Off. Noise may be generated if DTS
is set.
96 kHz PCM Out
MPEG Out
The factory default settings are indicated in italic.
28
En
Settings
Multichannel audio signals are converted to 2-channel linear PCM
LPCM (2CH) audio signals for output. This can be selected when the connected
HDMI-compatible device does not support multichannel audio.
Audio signals supported by the connected HDMI-compatible
device (Dolby Digital, DTS, MPEG and linear PCM) are output.
Auto
Audio signals not supported by the connected HDMI-compatible
device are converted to linear PCM for output.
Off No audio signals are output from the HDMI OUT terminal.
Audio signals are output from the DIGITAL AUDIO OUT (COAX-
On
IAL/ OPTICAL) terminals.
No audio signals are output from the DIGITAL AUDIO OUT
Off
(COAXIAL/ OPTICAL) terminal.
Dolby Digital audio signals are output. Select this when the con-
Dolby Digital
nected AV receiver or amplifier supports Dolby Digital audio.
Dolby Digital audio signals are converted to linear PCM audio
signals for output. Select this when the connected AV receiver or
Dolby Digital > PCM
amplifier does not support Dolby Digital audio.
DTS audio signals are output. Select this when the connected AV
DTS
receiver or amplifier supports DTS audio.
DTS audio signals are not output. Select this when the connected
Off
AV receiver or amplifier does not support DTS audio.
96 kHz audio signals are converted to 48 kHz/ 44.1 kHz audio
signals for output. Select this when the connected AV receiver or
96kHz > 48kHz
amplifier does not support 96 kHz audio.
96 kHz audio signals are output. Select this when the connected
96kHz
AV receiver or amplifier supports 96 kHz audio.
MPEG audio signals are output. Select this when the connected
MPEG
AV receiver or amplifier supports MPEG audio.
MPEG audio signals are converted to linear PCM audio signals for
MPEG > PCM output. Select this when the connected AV receiver or amplifier
does not support MPEG audio.