Front-Panel Features And Indicators - Dell PowerEdge HX574 Hardware Owner's Manual

Table 1-1. Keystrokes for Accessing System Features (continued)
Keystroke Description
<Ctrl+C> If a SAS controller is installed, this keystroke enters the SAS
Configuration Utility. See your SAS adapter User's Guide for more
information.
<Ctrl+S> Option is displayed if you have PXE support enabled through the
System Setup Program (see "Integrated Devices Screen" on page 51),
or iSCSI boot enabled. This keystroke allows you to configure NIC
settings for PXE boot. For more information, see the documentation
for the integrated NIC.

Front-Panel Features and Indicators

Figure 1-1 shows the controls, indicators, and connectors located behind the
optional rack bezel on the system's front panel.
About Your System
13