Uniden D1688 User Manual page 4

Connect the Power and Telephone Cords
Connect the base AC adapter to the
to the jack. Route the cords as shown:
TEL LINE
For desktop use
DESK
DESK
WALL
2. Plug the AC adapter into a standard 120V AC power outlet, and connect
the telephone cord to a standard telephone wall jack.
3. If you are mounting the phone on the wall, place the mounting slots
over the pins on the wall plate; slide the base down to lock it into place.
Test the Connection
Pick up the corded handset from the base. You should hear a dial tone and
the display on the base should say Talk. When you get a dial tone, make a
quick test call.
If...
the display says
you don't hear a dial tone
you keep hearing a dial tone
Changing to Pulse Dialing
Your phone uses tone dialing by default. If your phone company uses pulse
dialing, you need to change your phone's dial mode.
1. Press
Menu/select
2. Select Dial Mode
English - 4
WALL
Check TEL Line or
and choose Global
then Pulse. You'll hear a confirmation tone.
jack and the telephone cord
AC IN 7.8V
For wall mount use
DESK
WALL WALL
Try...
checking the connection between the
base and the phone jack.
changing to pulse dialing.
Setup.
DESK