admin\Desktop\0630_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section28.fm
•
Auger mark
•
Wrinkled/Stained paper
•
Damage on the leading edge of paper
The output is too light
Action
1
The toner cartridges may be low or need to be
replaced. Confirm the amount of toner left in
each toner cartridge.
Check the toner level in the Status tab in the
a
Status Monitor.
Replace the toner cartridges as necessary.
b
Does this solve your problem?
2
If you are using non-Dell brand toner cartridges,
disable the Non-Dell Toner option.
Launch the Tool Box, and click Non-Dell
a
Toner on the Printer Maintenance tab.
Ensure that the On check box is not selected.
b
Does this solve your problem?
3
Disable the Toner Saving Mode in the printer
driver.
On the Advanced tab, ensure that the Toner
a
Saving Mode check box is not selected.
Does this solve your problem?
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY
FILE LOCATION: C:\Users\fxstdpc-
Yes
No
The task is
Go to action 2.
complete.
The task is
Go to action 3.
complete.
The task is
Go to action 4.
complete.
Troubleshooting Guide
435