Printing Functions
Master Making Density
You can adjust the image density to
suit your needs.
Note
❒ You can specify the image density
that is selected by default when the
power is turned on. See "Master
Making Density" on p.108 "4 Ini-
tial Settings".
A
Press the {Master Making Density}
key to select the density you want
to set.
Note
❒ If your original has a colored
background such as red or blue,
select a lighter image density to
prevent the prints from appear-
ing dirty.
B
Make sure the {Master Making}
mode select key is lit.
Note
❒ If it is not lit, press the {Master
Making} mode select key.
3. Printing Functions
C
Press the {Start} key.
D
Press the {Proof} key to check the
print image density.
BFU009S
ANT128S
ANT123S
41