Ricoh Priport DX 3343 Operating Instructions Manual page 19

13. {Clear Modes/Energy Saver} key
• Clear Modes
Press to clear the previously entered
job settings.
• Energy Saver
Press to switch to and from Energy
Saver Mode p.32 "Energy Saver
Mode".
14. {Proof} key
Press to make proof prints.
15. {Master Making} mode select key
Press to select the master making mode.
16.
{Auto Cycle} key
Press to make masters and prints in a sin-
gle operation. See p.30 "Basic Proce-
dure".
17.
Print mode select key
Press to select the print mode.
18. {Fine} key
Press to select the fine image. See p.42
"Fine Mode".
19. {Security} key
Press to make prints of secret documents.
See p.61 "Security Mode".
20.
{Skip Feed/A3 Paper Feed} key
Press to select skip feed or A3 Paper Feed
printing. See p.60 "Skip Feed/A3 Paper
Feed".
21.
Data In indicator (Green)
• On: Data waiting for Master Making
and printing is in the machine.
• Blinking: Data is being received, or
Master Making or printing is in
progress.
• Off: Master Making and printing are
completed.
22.
Error indicator (Red)
• On: An error has occurred. Master
Making and printing stops.
• Off: Normal status
23. {Job Reset} key
Press to cancel the data from an optional
printer controller.
24.
{Hold Data-in} key
Press to reject the online print temporarily.
25. {Original Type} key
Press to select Text, Photo, Text/Photo,
Pale, or Pencil mode. See p.36 "Original
Type".
26.
{Reduce/Enlarge} key
Press to reduce or enlarge the image by
preset ratios. See p.42 "Preset Re-
duce/Enlarge".
27. {Combine/Repeat} key
Press to combine two originals onto one
print. See p.56 "Combine".
Press to repeat the image of an original
on one print. See p.59 "Repeat".
28.
{Full Size} key
Press to make full size prints.
29. {W} and {V} keys (Speed keys)
Press to adjust the printing speed. See
p.40 "Changing the Printing Speed".
30. {Image Position} key
Press to shift the image forwards or back-
wards. See p.37 "Adjusting the Print Im-
age Position".
31.
Number keys
Press to enter the desired number of
prints and data for selected modes.
32. {q} (Enter) key
Press to enter data in selected modes.
33. {Clear/Stop} key
Press to cancel a number you have en-
tered or to stop printing.
34. {Start} key
Press to start making masters or printing.
35.
Processing indicators
Shows the process of making master to
printing.
13