Selecting Output Options - Dell 7330 User Manual

Selecting Output Options

The Dell 7330 Mono Laser Printer has one standard output tray and two optional ones:
■ Standard Output Tray: Sends prints to the Standard Output Tray on top of the printer.
■ Stacker Upper Tray: Sends prints to the Stacker Upper Tray on the right side of the
printer. This tray is available with the optional finisher or stacker.
■ Stacker Lower Tray: Sends prints to the Stacker Lower Tray on the right side of the
printer. This tray is available with the optional finisher or stacker.
To select the output tray:
1. On the control panel, select
2. Select
Paper Handling Setup
3. Select
Paper Destination
4. Select either
Standard Output Tray
then press the OK button.
Note: The printer driver overrides the control panel settings for output tray selection.
Selecting Job Offset
The Stacker Lower Tray and Standard Output Tray can place sheets in alternate positions to
separate one print job from another. This is called job offsetting. There are several job
offsetting options from which to choose:
Off: No job offsetting occurs and the output position is not changed for the output tray
■
selected.
■ On: The output position changes after the final sheet of the print job is printed. The next
print job is then offset to keep it separate from the previous print job.
Note: When the stapling option is used for print jobs, job offsetting is activated.
To select the job offset option:
1.
On the control panel, select
2.
Select
Paper Handling Setup
3.
Select , and then press the OK button.
Job Offset
4.
Press the OK button to switch between
, and then press the OK button.
Printer Setup
, and then press the OK button.
, and then press the OK button.
,
Stacker Upper Tray
, and then press the OK button.
Printer Setup
, and then press the OK button.
and
On Off
Dell 7330 Mono Laser Printer
5-3
Printer Settings
, or
Stacker Lower Tray
.
, and