Manual Address Assignment - Dell 7330 User Manual

Manual Address Assignment

A manually entered IPv6 address is used in addition to any other IPv6 addresses. To create a
manual address, enter the IPv6 address and prefix length in the fields provided in EWS. The
default prefix length is 64.
To manually set the IPv6 address, use one of the following options:
The printer's control panel
■
■ Embedded Web Server
Setting the IPv6 Address with the Control Panel
To set the IPv6 address on the control panel:
1. Select
Printer Setup
2.
Select Connection Setup
3. Select
Network Setup
4. Select
TCP/IPv6 Setup
5.
Select
Manual Address
6. Select
Manual Address
7.
To set the address:
a. Use the Up Arrow and Down Arrow buttons to set the first number, and then press
the OK button.
b. Continue setting individual numbers, pressing the OK button after setting each one.
When you get to the end of the address, press the OK button to return to the menu.
Setting the IPv6 Address Using the Embedded Web Server
To manually set the IPv6 address using EWS:
1.
Launch your web browser.
2. Enter your printer's IP address in the browser's Address field.
3.
Click Properties.
4. Select the Protocols folder on the left navigation panel, and then click TCP/IP.
5. Click the TCP/IP (v6) button.
6.
In the Manual Address Assignment field, select Use this address, and then type the
address.
7.
Click the Save Changes button at the bottom of the page.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button to turn manual addressing on.
, and then press the OK button.
Dell 7330 Mono Laser Printer
3-29
IPv6