Replacing The Transfer Roller; Removing The Used Transfer Roller - Dell 5100cn Owner's Manual

Replacing the Transfer Roller

CAUTION:
Before performing any of the following procedures, read and follow the "CAUTION: SAFETY
INSTRUCTIONS" on page 9.
Dell transfer roller are available only through Dell. You can order more online at
http://www.dell.com/supplies or by phone. To order by phone, see"Order Printer Supplies" on
page 2.
Dell recommends Dell transfer roller for your printer. Dell does not provide warranty coverage for
problems caused by using accessories, parts, or components not supplied by Dell.

Removing the Used Transfer Roller

CAUTION:
Never throw a used transfer roller into a fire. It could explode resulting in burns and
injuries.
CAUTION:
Do not touch the edge of the plate at the upper side of the transfer roller because it is sharp.
NOTE:
Remove any print jobs from the center output tray, and close the multipurpose feeder cover
before opening the front cover.
Push the front latch up and fully open the front cover.
1.
Grip the tabs at both ends of the transfer roller and gently lift it out of the printer.
2.
47
Maintenance