Before You Begin - Installing The Table Stand; Battery Installation: Main Unit; Notes On Operation; Battery And Channel Installation: Remote Unit - Oregon Scientific BAA898HG User Manual

BEFORE YOU BEGIN -
INSTALLING THE TABLE STAND
Before operation, plug
the detachable table stand
into the display unit as
shown.
You can rotate the display unit freely by moving the unit around.

NOTES ON OPERATION

For best operation:
1. Insert batteries for the main unit first. Then proceed with
inserting the batteries for the remote unit.
2. Position the remote unit and the main unit within effective
transmission range. In usual circumstances, the effective range
is up to 100 meters.
3. Though the remote unit is weather proof, it should be placed
away form direct sunlight, rain or snow.

BATTERY INSTALLATION: MAIN UNIT

1. Gently open the battery compartment door as shown.
2. Insert four (4) pieces of UM-3 or "AA" size batteries in
accordance with the polarities shown.
3. Close the battery compartment door.
BATTERY AND CHANNEL INSTALLATION:
REMOTE UNIT
The remote thermo-hygro sensor unit uses two (2) UM-4 or
"AAA" size batteries.
5