Table of Contents
Advertisement
A.
TWO-LINE LCD
Displays the current temperature and humidity monitored by
the remote unit
B.
LED INDICATOR
Flashes when the remote unit transmits a reading
C.
°C/°F SLIDE SWITCH
Selects between Centigrade (°C) and Fahrenheit (°F)
D.
CHANNEL SLIDE SWITCH
Designates the remote unit Channel 1, Channel 2 or Channel 3
E.
RESET
Returns all settings to default values
F.
BATTERY COMPARTMENT
Accommodates two UM-4 or "AAA"-size alkaline batteries
G.
BATTERY DOOR
H.
WALL-MOUNT HOLDER
Supports the remote unit in wall-mounting
I.
REMOVABLE TABLE STAND
For standing the remote unit on a flat surface
BEFORE YOU BEGIN
For best operation:
1. Insert batteries for the remote unit first. Then proceed with
inserting the batteries for the main unit.
2. Position the remote unit and the main unit within effective
transmission range. In usual circumstances, the effective
range is 30 meters.
3. Though the remote unit is weather proof, it should be placed
away form direct sunlight, rain or snow.
913hg-e.p65
4
BATTERY INSTALLATION: MAIN UNIT
1. Gently lift the tab on the battery compartment door.
2. Insert four UM-3 or "AA" size alkaline batteries.
3. Replace the battery compartment door.
BATTERY AND CHANNEL
INSTALLATION: REMOTE UNIT
The remote thermo-hygro sensor unit uses two (2) UM-4 or "AAA"
size alkaline batteries.
Follow these steps to install / replace batteries:
1. Remove the screws on the battery compartment.
2. Select the channel number on the [CHANNEL] slide switch.
3. Select the temperature display unit on the °C/°F slide switch.
4
07/12/2001, 3:06 PM
Advertisement
Table of Contents
