Dell Precision HR707 Quick Reference Manual page 50

Video and Monitor Problems
CAUTION:
safety instructions in the
NOTICE:
If your computer came with a PCI Express graphics card installed,
removal of the card is not necessary when installing additional graphics cards;
however, the card is required for troubleshooting purposes. If you remove the card,
store it in a safe and secure location. For information about your graphics card, go
to support.dell.com.
The screen is blank
NOTE:
For troubleshooting procedures, see the monitor documentation.
C
H E C K T H E M O N I T O R C A B L E C O N N E C T I O N
• Ensure that the monitor cable is connected to the correct graphics card (for dual graphics
card configurations).
• If you are using a DVI-to-VGA adapter, ensure that the adapter is correctly attached to
the graphics card and monitor.
• Ensure that the monitor cable is connected as shown on the setup diagram for your
computer.
• Remove any video extension cables and connect the monitor directly to the computer.
• Swap the computer and monitor power cables to determine if the monitor's power
cable is defective.
• Check the connectors for bent or broken pins (it is normal for monitor cable connectors
to have missing pins).
C
H E C K T H E M O N I T O R P O W E R L I G H T
• If the power light is lit or blinking, the monitor has power.
• If the power light is off, firmly press the button to ensure that the monitor is
turned on.
• If the power light is blinking, press a key on the keyboard or move the mouse to
resume normal operation.
T
E S T T H E E L E C T R I C A L O U T L E T
testing it with another device, such as a lamp.
C
H E C K T H E D I A G N O S T I C L I G H T S
50
Quick Reference Guide
Before you begin any of the procedures in this section, follow the
Product Information Guide
— Ensure that the electrical outlet is working by
— See "Diagnostic Lights" on page 26.
—
—
.