Front Head Restraints - BMW SERIE 6 2004 Owner's Manual

Safety feature
1. Close the driver's door and turn the
ignition key to position 0 or 2
Press the desired memory button 1, 2
2.
or 3 and maintain pressure until the
adjustment process has been com-
pleted.
M
If you press the EMORY button acciden-
tally:
Press the button again; the indicator lamp
goes out.
Tilt function, passenger-side mirror
Automatic curb monitor
Activating
1. Select the driver's exterior mirror with
the switch
2. When you engage reverse gear or
selector-lever position R, the exterior
mirror glass on the front passenger side
tilts downward slightly. This allows the
driver to see the area immediately adja-
cent to the vehicle – such as a curb –
when parking, etc.
Deactivating
Slide the mirror selection switch to the pas-
senger's side position.

Front head restraints

Head restraints reduce the risk of spi-
nal injury in the event of an accident.
Adjust the head restraints so that they are
centered roughly at the level of your
Coupe
Adjusting the height
>
>
Adjusting tilt angle
Swivel the head restraints.
Removal
1.
2.
Installation
Push the head restraint into the supports.
Convertible
Adjusting height
>
>
ears.<
Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG
To raise: pull
To lower: press.
To reach the lowest position, press
the button, refer to arrow
Pull the head restraint upwards to the
stop
Press the button, arrow 1, and remove
the head restraint.
To raise: move the switch upwards
To lower: move the switch downwards.
1.<
45