Table of Contents
Advertisement
Calling up stored messages on
Control Display
Using CHECK button
1.
Press the button longer:
The first stored message is displayed
2.
Briefly press the button:
A new message appears each time you
briefly press the button.
Using Control Center
Control Center, for principle details, refer to
page 16:
1.
Press button.
The start menu is opened
2.
Press the controller to open the
3.
Select "Service" and press the control-
ler
4.
Select "Check Control messages" and
press the controller. The stored mes-
sages appear on the display
5.
Select the desired message and press
the controller.
68
The display disappears automatically after
a short time.
To exit the menu immediately:
Select
Displays after completion of trip
Malfunction reports generated during the
trip are shown consecutively when you
switch off the ignition.
Before the display disappears, you can dis-
play the messages once again. Press the
CHECK button for approx. 2 seconds.
If several messages are present, you can
continue to briefly press the CHECK button
to view them in succession.
The display
>
>
menu
Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG
and press the controller.
cancels itself automatically after a brief
period
can be canceled by again pressing the
CHECK button for approx. 2 seconds.
Advertisement
Table of Contents
