Bmw Motorrad Front-Wheel; Stand - BMW G 650 GS Rider's Manual

BMW Motorrad front-
wheel stand
Install the front-wheel

stand

OE
without centre stand
Place the motorcycle on a suit-
able auxiliary stand.
OE
with centre stand
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
The BMW Motorrad front
wheel stand is not designed
to support motorcycles not fitted
with a centre stand or without
other auxiliary stands. A motor-
cycle resting only on the front
wheel stand and the rear wheel
can topple.
Place the motorcycle on its
centre stand or another auxiliary
stand before lifting the front
wheel with the BMW Motorrad
front-wheel stand.
Use the front-wheel stand with
the number (0 402 240).
Slacken adjusting screws 1 of
the front-wheel stand.
Push the two adapters 2 apart
until the front forks fit between
them.
Use locating pins 3 to set the
front-wheel stand to the de-
sired height.
Install rubber buffers 4 in the
top positions on left and right.
Centre the front-wheel stand
relative to the front wheel and
push it against the front axle.
Align the two adapters 2 so
that the front forks are securely
seated.
Tighten adjusting screws 1.
8
83
z