Jump Starting - BMW G 650 GS Rider's Manual

8
92
Connect plug 5.
z
Seat the intake air pipe in
mount 4.
Seat the intake air pipe in
guides 7 of the air filter
housing. Take care not to
bend the rubber seals of the air
filter element out of shape.
Install connecting flange 2.
Install two screws 1.
Install the right side panel
( 97).

Jump starting

The wires leading to the
power socket do not have
a load-capacity rating adequate
for jump-starting the engine. Ex-
cessively high current can lead
to a cable fire or damage to the
vehicle electronics.
Do not use the on-board socket
to jump-start the engine of the
motorcycle.
A short-circuit can res-
ult if the crocodile clips
of the jump leads are accident-
ally brought into contact with the
motorcycle.
Use only jump leads fitted with
fully insulated crocodile clips at
both ends.