Printer Problems - Dell Dimension PY349 Owner's Manual

I F T H E P O W E R L I G H T I S B L I N K I N G A M B E R
internal power problem might exist.
• Ensure that the voltage selection switch is set to match the AC power at your location (if applicable).
See "Back View of the Computer" on page 13.
• Ensure that the 12-volt power connector (12V) is securely connected to the system board (see "System
Board Components" on page 65).
E L I M I N A T E I N T E R F E R E N C E
• Power, keyboard, and mouse extension cables
• Too many devices on a power strip
• Multiple power strips connected to the same electrical outlet

Printer Problems

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
NOTE:
If you need technical assistance for your printer, contact the printer's manufacturer.
C H E C K T H E P R I N T E R D O C U M E N T A T I O N
troubleshooting information.
N S U R E T H A T T H E P R I N T E R I S T U R N E D O N
E
C H E C K T H E P R I N T E R C A B L E C O N N E C T I O N S
• See the printer documentation for cable connection information.
• Ensure that the printer cables are securely connected to the printer and the computer (see "Setting Up a
Printer" on page 15).
T E S T T H E E L E C T R I C A L O U T L E T
device, such as a lamp.
44
Solving Problems
— The computer is receiving electrical power, but an
— Some possible causes of interference are:
— See the printer documentation for setup and
—
— Ensure that the electrical outlet is working by testing it with another