System Setup; Overview; Entering System Setup - Dell Dimension PY349 Owner's Manual

Environmental (continued)
Maximum vibration:
Operating
Storage
Maximum shock:
Operating
Storage
Altitude:
Operating
Storage

System Setup

Overview

Use system setup as follows:
• To change the system configuration information after you add, change, or remove any hardware in your
computer
• To set or change a user-selectable option such as the user password
• To read the current amount of memory or set the type of hard drive installed
Before you use system setup, it is recommended that you write down the system setup screen
information for future reference.
NOTICE:
Unless you are an expert computer user, do not change the settings for this program. Certain changes
can make your computer work incorrectly.

Entering System Setup

1 Turn on (or restart) your computer.
2 When the blue DELL™ logo is displayed, you must watch for the F2 prompt to appear.
3 Once this F2 prompt appears, press <F2> immediately.
NOTE:
The F2 prompt indicates that the keyboard has initialized. This prompt can appear very quickly, so you must
watch for it to display, and then press <F2>. If you press <F2> before you are prompted, this keystroke will be lost.
4 If you wait too long and the operating system logo appears, continue to wait until you see the
®
Microsoft Windows
on page 61) and try again.
5 to 350 Hz at 0.0002 G
5 to 500 Hz at 0.001 to 0.01 G
40 G +/- 5% with pulse duration of 2 msec +/- 10% (equivalent to
20 in/sec [51 cm/sec])
105 G +/- 5% with pulse duration of 2 msec +/- 10% (equivalent
to 50 in/sec [127 cm/sec])
–15.2 to 3048 m (–50 to 10,000 ft)
–15.2 to 10,668 m (–50 to 35,000 ft)
®
desktop. Then, shut down your computer (see "Turning Off Your Computer"
2
/Hz
2
/Hz
111
Appendix