J2936bk0.book Page 81 Tuesday, September 2, 2003 3:06 PM
Removing an AGP Card
Press the card lever toward the PCI connector.
1
Pull the card up and out of the card clip.
2
notch
lever
card clip
Installing an AGP Card
To add or replace the card, press the card lever toward the PCI connector and gently
1
press the card into the AGP connector until it clicks into place.
card clip
lever
Release the card lever, ensuring that the tab fits into the notch on the front end of the
2
card.
tab
AGP connector
PCI connector
AGP card
card clip
slot connector
back of computer
81
Adding Pa rts