Setting The Date/Time; Replacing The Battery - Minolta DYNAX 303 SI Instruction Manual

FOR OWNERS OF THE QUARTZ DATE MODEL

Setting the Date/Time

1. Press the mode button to choose
the data imprinting format.
• M will appear above the month.
2. Use the select button (SEL) to
move between different parts of
the displayed data.
• The selected part will blink, indicating that it
is the data to be changed.
3. Press the adjust button (ADJ) to
change the data to the correct
value.
• Data continues changing as long as the
button is held down.
• In time mode, pressing the ADJUST button
while : is blinking resets the seconds counter
to zero (not shown).
4. When all data is correct, press
the select button (SEL) until the
data stops blinking.
42

Replacing the Battery

The quartz data back uses a CR2025 lithium battery, located on the
inside of the back cover. Replace the battery if the display or
imprinted data becomes dim.
1. Open the back cover.
2. Using a coin or similar
3. Remove the old battery and
4. Replace the battery cover,
object, turn the battery cover
counter-clockwise, then
remove it.
replace it with a new one.
• The + side should face up.
then reset the date and time.
43