Quick Operation - Minolta DYNAX 303 SI Instruction Manual

QUICK OPERATION

1. Insert batteries.
2. Attach lens.
3. Turn on power.
4. Load film.
8
• This camera uses two CR2 lithium
batteries.
• Align the red mounting dot on the lens
with the one on the camera. Gently
insert the lens into the mount and turn it
clockwise until it clicks into the locked
position.
• Slide the main switch to ON.
• Align the film tip with the red mark, then
close the back cover.
5 If using a zoom lens, rotate
the zooming ring to frame
your subject as desired.
6 Center your subject in the
focus frame, then press the
shutter release button
partway down.
• The camera will focus and set
exposure automatically.
7 Take the picture.
• Gently press the shutter-release button
all the way down to take the picture.
9