5. If "Client for Microsoft Networks" does not appear in the "Network
Configuration" screen, highlight "Client" on the list and, once again,
press the "Add" button and the following screen will appear:
6. Select "Microsoft" as the manufacturer and "Client for Microsoft
Networks", and press "OK".
7. After a few seconds,
the network
configuration window
will open again. Press
the "Add" button and
add protocol if
"TCP/IP-32-Bit PCI
Fast Ethernet Adapter"
is not present. This
time, select
"Microsoft" as the
manufacturer
and "TCP/IP", and
press "OK".
Creating a Simple Network
42